• 1ASSEMBLY MANUALHOBIE CAT EUROPEZI Toulon Est, BP 25083078 Toulon cedex 9, FranceTel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 13 99Email : hobie
• 10Before installing the jib onthe Hobie Wave, you mustfirst install the parallel bowspreader (provided with theturbo kit). Install bow spreadertang
• 11RIGHTING LINETake the righting line from the rope bagand attach it to the front crossbar as indi-cated on the picture. Store the excess linein th
• 12CAUTION / SAFETY TIPSA LIRE AVANT DE PARTIRSafety tips/Sécurité♦ Whether on land or on the water, watch for overhead power lines
• 2ASSEMBLY MANUALTABLE OF CONTENTHull assembly ...3Trampoline fitting ...
• 3Lift the front crossbar and insert the left end into the lefthull. Lift the rear crossbar and insert the left end into theleft hull. NB : The cros
• 4NB : A tight trampoline gives the boat its rigidity.TRAMPOLINETrampoline fittingsProceed to lace the trampoline halves along the rearfirst. Do not
• 5Locate the tiller crossbar andidentify the left and right handends. NB: the tiller crossbar (1)locates on top of the tiller/rudderarms (2).Locate
• 6Remove the main and jib halyard lines from the ropesbags. Unroll the main halyard wire that is secured at thehead of the mast. Using a bowline kno
• 7With the person on the trampoline supporting the mast, theother person shackle the two bridles to the stay adjuster atthe end of the forestay. No
• 8Unfold the mainsail and lay on a flat clean surface. Undo the set of battens and identifywhich batten goes in which batten pocket. Insert the batt
• 9These pictures show how the mainsheet system isassembled and shackled to the traveller car and theclew of the mainsail.12MAINSHEET3
Comments to this Manuals